Shanghai Nuoguang is a professional manufacturer of reducers, and BD micro cycloidal pinwheel reducers are available in stock. The reducer products are smaller in size, better in quality, lighter in weight, more refined in appearance, and available from stock. The micro cycloidal pinwheel reducer is a machine that achieves deceleration by meshing cycloidal pin teeth based on the planetary transmission principle with small tooth difference. The machine is divided into horizontal, vertical, dual-axis and direct-coupled assembly methods.
BD: Indicates the miniature cycloidal pinwheel reducer, the base model is, single-stage reduction, vertical installation with motor type, the reducer is, and the motor power is. Shanghai Nuoguang Reducer Processing Center provides: miniature cycloidal pinwheel reducer, cycloidal pinwheel reducer, single-stage cycloidal reducer, aluminum alloy cycloid reducer, and aluminum shell micro cycloidal pinwheel reducer.
Reducer model and reduction ratio
Single-stage reducer speed ratio models include B, B, B, B, B
Reduction ratios include,,,,,,,, ,.
The two-stage reducer models are B, B, B, B
The reduction ratios are,,,,,,,,, respectively.
Technical parameters: Power: .~ Torque: &~&
Transmission ratio: single-stage and double-stage
Type B horizontal single-stage micro aluminum alloy cycloidal reducer
B Type horizontal two-stage miniature aluminum alloy cycloidal reducer
Type B vertical single-stage miniature aluminum alloy cycloid reducer
Type B vertical two-stage miniature aluminum alloy cycloidal reducer
Type B vertical method flange single-stage micro cycloidal reducer
Type B vertical method flange two-stage micro cycloid reducer
Characteristics and uses of B series micro cycloidal pinwheel reducer
, large reduction ratio and high efficiency. This series of reducers have single-stage reduction ratios and double-stage reduction ratios respectively. If a three-stage reducer is used, the reduction ratio will be larger and the mechanical efficiency will reach more than %.
Due to the planetary transmission structure, the input shaft and the output shaft are on the same axis, so it is small in size and light in weight.
Due to the use of flow bearing contact, the main parts are made of high-carbon chromium-rolled steel (r) and quenched by heat treatment, with a hardness of up to 100%.
The horizontal feet and vertical flanges of this series of reducers are made of aluminum alloy. Therefore, during installation, the center height should be calibrated for the horizontal type and the output shaft and flange should be calibrated for the vertical type to be coaxial with the installation location. Spend.
When installing couplings, pulleys, sprockets and other parts on the output shaft, it is not allowed to use a hammer to knock them in. Use the screw holes at the outer end of the output shaft to screw in the screws and press in the connecting parts.
In addition to all the characteristics of ordinary reducers, this series of reducers are lubricated with grease and are not prone to oil leakage. Grease has been injected at the factory, which is very convenient for users and can be customized according to user needs. , can be installed and used at any angle and in any direction.
Cycloid reducer also has the characteristics of strong overload capacity, impact resistance, small inertia moment, and is suitable for frequent starting and forward and reverse rotation.
The cycloid reducer adopts aluminum alloy die-casting shell, which has the characteristics of more beautiful appearance, smaller size and lighter weight.
Cycloid reducer is suitable for reduction devices and transmission devices in food machinery, printing machinery, textile machinery, pharmaceutical machinery, ceramic machinery and various industrial production lines
WB65-LD-29-120 miniature cycloidal pinwheel reducer Nuoguang reducer manufacturer