&Shanghai Nuoguang manufacturer produces and sells cycloidal pinwheel reducers all over the country. The reducer adopts the principle of cycloidal pin tooth meshing and planetary transmission, so it is usually called a planetary cycloidal reducer. It is widely used in petroleum, environmental protection, chemical industry, cement, transportation, textile, food, printing, lifting, mining, metallurgy, etc. Construction, power generation and other industries. As a drive or reduction device, the machine is divided into horizontal, vertical, dual-axis and direct-coupled installation methods. Its unique stable structure can replace ordinary cylindrical gear reducers and worm gear reducers in many cases. Therefore, it is widely used in various industries and fields and is generally welcomed by users.
, Basic model of B planetary cycloid reducer:
Specifications (single-stage:, /B double-stage:, /B) Models are: single-stage:, double-stage:,
, B series planetary cycloidal pinwheel reducer torque calculation:
Cycloidal pinwheel reducer torque =&motor power&motor power input revolutions&speed ratio&use efficiency (%%)
Power: .~ Torque: &~
Single stage: Double stage:
Reduction ratio: the ratio of input speed to output speed.
Number of stages: the number of sets of planetary gears. Generally, it can reach level three, and the efficiency will be reduced.
Full load efficiency: The transmission efficiency of the reducer under the highest load condition (output torque stops when fault occurs).
Working life: The cumulative work of the reducer at rated load and rated input speed.
Rated torque: It is the torque that the rated life allows for long-term operation. When the output speed is rpm, the life of the reducer is the average life. When this value is exceeded, the average life of the reducer will be reduced. The reducer fails when the output torque exceeds twice.
Noise: The unit is decibel. This value is measured when the input speed is rpm, without load, and meters away from the reducer.
Hysteresis: When the input end is fixed, the output end rotates clockwise and counterclockwise. When the output end bears plus or minus % of the rated torque, the output end of the reducer will be displaced by a tiny angular displacement. This angular displacement is return gap. The unit is &min&r, which is one degree /.
1. The main features of the cycloidal pinwheel reducer:
, high speed ratio and high efficiency. Single-stage transmission can achieve: reduction ratio, efficiency above %. If multi-stage transmission is used, the reduction Than bigger. Cycloidal pinwheel reducer: the one-stage transmission reduction ratio is ~, the two-stage transmission reduction ratio is ~, the multi-stage combination can reach tens of thousands, and the pin tooth meshing system has rolling friction, and the meshing surface has no relative sliding, so the first stage The deceleration efficiency reaches %.
, Smooth operation, low noise: There are many pairs of teeth in contact at the same time during operation, large overlap, smooth operation, strong overload capacity, low vibration and noise, and various specifications of models have low noise.
, reliable in use and long life: because the main parts are made of high carbon alloy steel quenched () and then finely ground, and the meshing of the cycloid teeth and the pin tooth sleeve is transmitted to the pin teeth to form rolling friction, friction The coefficient is small, so there is no relative sliding in the meshing area and minimal wear, so it is durable.
. Compact structure and small volume: Compared with other reducers of the same power, the weight and volume are small/more. Due to the planetary transmission, the input shaft and the output shaft are on the same axis to obtain the smallest possible size.
, strong overload capacity, impact resistance, small inertia moment, suitable for frequent starts and forward and reverse operation.
Reasonable design, convenient maintenance, easy disassembly and installation, minimum number of parts and simple lubrication make the cycloidal pinwheel reducer deeply trusted by users.
The cycloidal pinwheel reducer is a novel transmission device that applies the planetary transmission principle and adopts cycloidal pin tooth meshing. The entire transmission device of the cycloid reducer can be divided into three parts: input part, reduction part, and output part. A misaligned double eccentric sleeve is installed on the input shaft. Two roller bearings called swing arms are installed on the eccentric sleeve. The center holes of the mechanism and the two cycloid wheels are the rollers of the swing arm bearings on the eccentric sleeve. channel, and the cycloidal wheel meshes with a set of annularly arranged pin teeth on the pin gear to form an internal meshing reduction mechanism with a tooth difference of one tooth. (In order to reduce friction, in a reducer with a small speed ratio, the needle The teeth are equipped with pin tooth sleeves).
X32 cycloidal pinwheel reducer with 0.37KW factory direct delivery to all parts of the country