Shanghai Nuoguang Machinery Co., Ltd.

&Shanghai Nuoguang produces continuously variable transmissions. The first-stage gear transmission (speed range) is matched with power output torque. The speed ratio transmission can be installed vertically or horizontally.
Continuously variable transmission model:
Horizontal: BBBBBBB Vertical: BBBBBBB.
Transmission range:
Basic type: r/
Transmission with one-stage gear reduction (=.): r/
Transmission with two-stage gear reduction (=.): r/
Technical parameters:
Input power:.~
Speed regulating range:~r/
Allowable torque:.
This series of continuously variable transmissions are unified The standard series of ordinary three-phase asynchronous motors use pure copper motors. If you need frequency conversion, braking, explosion-proof, frequency conversion braking, etc. motors, please contact us or make a note yourself.
B Continuously variable transmission product features:
In practical use, the continuously variable transmission has proven to have a unique style among many continuously variable transmission families. The design structure of this series of products combines easy operation and stable transmission. and other characteristics, so it is widely used in food machinery, printing, paper machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various work production lines that require variable process parameters and continuous changes in speed. It also has new products The working speed of the machine was explored during the trial production process.
, B stepless transmission has high speed regulation accuracy, and the speed regulation accuracy is .
, Large height range and speed regulation range =.
, The output torque and power of the B transmission change with the change of the output revolutions, and have the mechanical characteristics of variable torque and variable power.
All transmission parts of the transmission have been strictly processed, precision processed, ground, and have good contact and lubrication properties, so they operate smoothly, have low noise, and have a long life.
The characteristic of B stepless transmission is that it can be effectively used in combination with various gear reducers, cycloidal pinwheel reducers, worm gear reducers and reduction motors, thereby increasing the output torque and realizing It has the lowest and highest output speed for various occasions and has good adaptability.
&The manufacturer hereby reminds you of several precautions when using a continuously variable transmission: The speed of the continuously variable transmission must be adjustable when it is turned on. The handwheel should not be turned too fast when adjusting the speed. It is strictly prohibited to turn the adjustment wheel when it is stopped. Speed hand wheel. The speed regulating limit screw under the handwheel has been adjusted at the factory and must not be adjusted arbitrarily to avoid damage to the transmission parts. The traction oil of the continuously variable transmission is filled with enough traction oil when it leaves the factory. There is no need to add more. The transmission must not be started and used without oil. The ambient temperature is ℃~+℃, the internal temperature rise of the machine shall not exceed ℃, and the maximum temperature shall not exceed ℃. If the motor is replaced, attention should be paid to retaining the original motor flange with oil seal to prevent lubricating oil from flowing into the motor. The continuously variable transmission is suitable for normal use. , run in both opposite directions, but the rated torque must not be exceeded. The use of continuously variable transmission and worm gear reducer is only suitable for power transmission and cannot be self-locking.